Honeywell V4295A1015
The Honeywell V4295A1015 Normally Closed Solenoid Gas Valve is an electrically operated safety shutoff valve designed for commercial and industrial gas combustion applications. It provides fast and reliable on/off control of gaseous fuel flow in compatible burner systems, boilers, furnaces, and industrial heating equipment.
As part of the Honeywell V4295 Series, the V4295A1015 features a normally closed operating configuration. The valve remains closed when electrical power is not applied and opens when the appropriate control voltage energizes its solenoid.
This operating principle supports automatic gas shutoff in compatible combustion systems. When the associated burner control removes electrical power, the valve closes to interrupt the flow of gas to the connected equipment.
The Honeywell V4295A1015 operates with a 120 VAC electrical supply at 50/60 Hz. Its direct-acting solenoid mechanism provides an opening time of less than one second and a closing time of less than one second under the specified operating conditions.
The valve is equipped with 1/2-inch NPT threaded connections and is designed for installation in compatible gas piping systems. Its straight-through body configuration facilitates integration into appropriately sized fuel gas lines.
With a maximum operating pressure rating of 2 PSI (13.8 kPa), the V4295A1015 is suitable for low-pressure gas control applications within the operating limits established by Honeywell.
The valve provides a rated flow capacity of 250 cubic feet per hour (CFH), equivalent to approximately 7.1 cubic meters per hour, at the specified reference pressure drop of one inch of water column.
This capacity rating helps engineers and maintenance professionals evaluate whether the valve is suitable for a particular burner gas flow requirement. Actual system performance depends on the fuel characteristics, available pressure differential, piping arrangement, and operating conditions.
The Honeywell V4295A1015 features a die-cast aluminum valve body designed for compatible commercial and industrial gas service. Its construction supports use with natural gas, manufactured gas, mixed gas, liquefied petroleum gas, and air.
The valve incorporates a positive shutoff arrangement intended to prevent gas flow when the solenoid is de-energized. Its spring-assisted closing mechanism helps provide consistent valve closure during normal shutdown or an interruption of electrical power.
Upstream and downstream 1/4-inch NPT pressure taps allow technicians to connect suitable pressure measuring equipment for system inspection, adjustment, and troubleshooting.
The V4295 Series is designed to provide low operating noise and reduced inrush current during electrical actuation. These characteristics make the series suitable for combustion equipment incorporating electrically operated gas safety valves.
Typical applications include industrial gas burners, commercial boilers, furnaces, ovens, atmospheric burners, commercial water heaters, rooftop make-up air units, and industrial heating systems.
The Honeywell V4295A1015 may be installed in compatible combustion control arrangements that require rapid-opening and rapid-closing gas valve operation.
For burner management applications, the valve must operate as part of a properly designed and approved gas safety system. The solenoid valve does not independently perform flame detection, burner sequencing, or complete flame safeguard functions.
Correct integration with the associated burner safety controller, pressure switches, safety interlocks, and other required combustion control components is essential.
When replacing an existing solenoid gas valve, maintenance personnel should confirm the original manufacturer part number, voltage, pipe connection size, operating pressure, gas flow capacity, fuel compatibility, and required valve operating configuration.
The V4295A1015 must not be confused with normally open vent valves from the V4295S Series or with other V4295 models having different pipe sizes or pressure ratings.
Installation should be performed by qualified personnel familiar with fuel gas systems and industrial combustion equipment. All installation, leak testing, and commissioning procedures must follow Honeywell instructions and applicable safety regulations.
JJC Global Group LLC supplies Honeywell industrial gas valves, combustion control components, burner management accessories, and industrial replacement parts for maintenance and equipment servicing applications.
The Honeywell V4295A1015 Solenoid Gas Valve is available for quotation through JJC Global Group LLC for commercial and industrial combustion equipment, maintenance operations, and replacement requirements.
Contact JJC Global Group LLC for product information, technical specifications, and quotation requests for the Honeywell V4295A1015 Normally Closed Solenoid Gas Valve.
For detailed technical specifications, electrical connections, installation instructions, and gas valve safety requirements, refer to the official Honeywell V4295 Series Solenoid Gas Valve documentation.