JJC GLOBAL GROUP LLC

All Products ▼

United Brass Works 34041 High Pressure Boiler Gauge Fixture Set with Ball Check

United Brass Works 902 High Pressure Upper Gauge Fixture Valve

Part #: 34041
Model: 34041
Manufacturer: United Brass Works
Category: Valves & Pumps
Request a Quote
Key Specifications

– High pressure boiler gauge fixture set
– Ball check design
– Offset configuration
– 250 WSP pressure rating
– Maximum temperature: 406°F
– Upper and lower 1/2″ gauge fixtures
– Union bonnets
– Blowout-proof stems
– Adjustable union tail pieces
– 1/8″ adjustment for alignment
– Steel protector rod set
– ASME B31.1 compliant
– Complies with ASME Boiler Code Section I, PG-60, Appendix A-18
– CRN OCO7137.2C
– Approximate unit weight: 6.5 lb
– Not intended for potable water systems
United Brass Works specifies the Model 34041 at 250 WSP at 406°F and identifies it as an offset high-pressure boiler gauge fixture set with ball check.

Overview

United Brass Works 34041 high pressure boiler gauge fixture set with ball check, offset design, 250 WSP at 406°F, adjustable union tail pieces, and ASME boiler code compliance. Outbound Link

Technical Specifications

Manufacturer: United Brass Works
Model: 34041
Part Number: 34041
Product Type: High Pressure Boiler Gauge Fixture Set with Ball Check
Design: Offset
Fixture Size: 1/2″
Upper Fixture: Model 902
Lower Fixture: Model 903
Protector Rod Set: Model 908, Steel
Steam Pressure Rating: 250 WSP
Maximum Temperature: 406°F
Bonnet Type: Union Bonnet
Stem Design: Blowout-Proof
Tail Piece Adjustment: 1/8″
Approximate Unit Weight: 6.5 lb
Standard Compliance: ASME B31.1
Boiler Code Compliance: ASME Section I, PG-60, Appendix A-18
CRN: OCO7137.2C
Potable Water: Not intended for potable water systems United Brass Works, Inc.

United Brass Works 34041 High Pressure Boiler Gauge Fixture Set Overview

The United Brass Works 34041 is a high pressure boiler gauge fixture set with ball check designed for water-level indication systems used on steam boilers. The assembly provides the upper and lower gauge connections required for installation of a gauge glass, allowing operators to visually monitor the boiler water level during operation.

The Model 34041 uses an offset design and incorporates union bonnets with blowout-proof stems. Its union tail pieces provide approximately 1/8 inch of adjustment, helping facilitate proper alignment of the upper and lower fixtures during installation. These features make the assembly suitable for industrial boiler installations where accurate positioning of the water gauge assembly is required. United Brass Works, Inc.

The United Brass Works 34041 is rated for 250 WSP at a maximum temperature of 406°F. United Brass Works also lists the fixture set as compliant with ASME B31.1 and with Section I, PG-60, Appendix A-18 of the ASME Boiler Code, making it specifically suited to boiler water-level gauge applications. United Brass Works, Inc.

The complete assembly uses a Model 902 1/2-inch upper fixture, a Model 903 1/2-inch lower fixture, and a steel protector rod set. According to the manufacturer’s specification sheet, the assembly has an approximate unit weight of 6.5 pounds. United Brass Works, Inc.

The integrated ball-check arrangement provides an additional protective function in the gauge system. Boiler gauge fixture ball checks are intended to help reduce the release of steam or water in the event the gauge glass breaks. United Brass Works lists its high-pressure fixture assemblies among the products designed specifically for direct boiler and water-column installations. United Brass Works, Inc.

Correct alignment of a boiler gauge glass assembly is important for dependable water-level indication. The adjustable union tail pieces on the Model 34041 provide additional flexibility during installation, while the offset configuration allows the upper and lower valves to be positioned appropriately for the gauge glass.

United Brass Works specifies that the proper gauge glass length can be determined by subtracting 3/4 inch from the center-to-center dimension of the installed valves. The gauge glass itself should be selected according to the dimensions and requirements of the specific boiler installation. United Brass Works, Inc.

The United Brass Works 34041 is intended for industrial boiler service and should be selected according to the operating pressure, temperature, connection arrangement, gauge glass dimensions, and applicable boiler requirements. Manufacturer documentation also states that this product contains lead and is not intended for potable water systems. United Brass Works, Inc.

For boiler maintenance, replacement projects, and new installations requiring a high-pressure water gauge fixture assembly, the Model 34041 provides an engineered solution with upper and lower fixtures, ball-check protection, adjustable connections, and recognized ASME boiler-code compliance.

Explore more United Brass Works products available from JJC Global Group.

⇄ Compare 0 ♥ Saved 0